24/7 Emergency Service

Fire Extinguisher Recharge Services in Lower Mainland, BC

Fire Alarm Inspection in Burnaby

A fire extinguisher needs to be ready to work when an emergency occurs. If an extinguisher has been discharged, lost pressure, damaged, or identified as requiring service, professional attention can help ensure it remains suitable for use.

Otis Fire Protection Services provide recharging, refilling, and testing of fire extinguishers all over the Lower Mainland, such as Vancouver, Burnaby, Richmond, Surrey, and Fraser Valley. We service many different places like offices, restaurants, warehouses, strata buildings, and industrial areas. Technicians can also perform other fire protection services.

We also offer an emergency 24/7 service around the whole of the Lower Mainland if you need urgent help with your fire extinguishers and fire protection system.

Fire Extinguisher Recharge Services

A fire extinguisher that has been discharged should not simply be placed back on the wall and considered ready for another emergency. Even a partial discharge can affect the pressure and amount of extinguishing agent inside the unit.

Our service can help with:

  • Fire extinguisher maintenance and refilling
  • Post-discharge servicing
  • Fire extinguisher condition assessment
  • Pressure and component checks
  • Hose, nozzle, handle, pin, and seal inspection
  • Identification of damaged or unsuitable units
  • Maintenance recommendations
  • Service documentation and records
  • Fire extinguisher replacement when servicing is not appropriate
  • Ongoing fire extinguisher maintenance support

The correct service depends on the extinguisher type, condition, service history, and applicable requirements.

When Does a Fire Extinguisher Need to Be Recharged?

Not every extinguisher needs to be recharged simply because a certain amount of time has passed. Recharging is commonly required after an extinguisher has been discharged or when servicing identifies a need for it.

Have an extinguisher assessed if:

  • It has been used during a fire or emergency
  • It has been partially discharged
  • The pressure gauge does not indicate the expected pressure
  • The cylinder shows signs of damage or corrosion
  • The hose or nozzle is damaged
  • The safety pin or tamper seal is missing
  • The extinguisher appears to be leaking
  • A previous inspection identified a service issue

If you are uncertain whether an extinguisher needs a recharge, repair, or replacement, professional assessment can help determine the appropriate next step.

Fire Extinguisher Recharge vs. Refilling

A fire extinguisher recharge restores the extinguishing agent after an extinguisher has been discharged or requires servicing. Before returning the unit to service, it should be assessed for pressure, damage, corrosion, and the condition of its key components to help ensure it is ready for an emergency.

Fire extinguisher refilling generally means replacing or replenishing the extinguishing agent inside the unit. Refilling should be performed as part of proper professional servicing rather than simply adding agent, as the extinguisher may also require inspection and checks to determine whether it remains suitable for continued use.

Our Fire Extinguisher Service Process

Professional servicing should begin with an assessment rather than assuming every extinguisher requires the same treatment.

1. Equipment Assessment
The extinguisher is examined for its type, condition, pressure, visible damage, corrosion, and evidence of discharge.

2. Service Recommendation
Based on the condition of the unit, the appropriate action may be recharge, maintenance, repair, or replacement.

3. Professional Servicing
If the extinguisher is serviceable, the required work is carried out using appropriate procedures and components.

4. Inspection After Service
The unit is checked to ensure the servicing has been completed appropriately before it is returned to service.

5. Documentation
Relevant service information can be documented to help property owners and facility managers maintain their fire protection records.

6. Return to Service
Once properly serviced, the extinguisher can be returned to its designated location where it remains accessible for emergency use.

Fire Extinguisher Recharge for Commercial Properties

Businesses often have multiple extinguishers distributed throughout a building. Keeping track of their condition and service requirements can become difficult without a planned maintenance process.

We provide support for a range of commercial properties, including:

  • Office buildings
  • Retail stores
  • Restaurants and commercial kitchens
  • Warehouses
  • Industrial facilities
  • Strata and multi-unit properties
  • Property management companies
  • Schools and institutional facilities
  • Construction and commercial sites

For businesses managing multiple fire extinguishers, professional servicing can also make it easier to maintain consistent inspection records and identify units that need additional attention.

What Should You Do After Using a Fire Extinguisher?

If an extinguisher has been discharged, even briefly, do not assume it is ready for another emergency. Follow these general steps:

  • Remove the discharged unit from reliance for emergency protection.
  • Have it assessed by a qualified fire protection service provider.
  • Determine whether it requires recharge, maintenance, repair, or replacement.
  • Ensure suitable fire protection remains available while the unit is out of service.
  • Keep the service record updated.

If the extinguisher was used during an actual fire, follow your property's emergency procedures and any applicable reporting requirements.

Can a Damaged Fire Extinguisher Be Recharged?

A damaged extinguisher should be assessed before recharge.

Depending on the condition of the cylinder and components, the appropriate solution may be repair or replacement rather than recharge.

Look for warning signs such as:

  • Heavy corrosion
  • Damaged cylinder
  • Broken handle
  • Cracked hose
  • Damaged nozzle
  • Missing safety components
  • Leakage

The goal of professional servicing is not simply to refill the cylinder. It is to determine whether the equipment is appropriate for continued service.

Hydrostatic Testing for Fire Extinguishers

Any extinguisher cylinder acts as a pressure container, and the metal becomes weak over time. Hydrostatic testing allows the verification of its ability to sustain pressure. We fill the cylinder with water, then we increase the application of pressure above its normal operating level and look for variations, leakage, and any signs of weaknesses. If it passes, it is ready for use again; if not, it will be decommissioned.

CO2 extinguishers, water extinguishing units, and wet chemical extinguishers normally undergo testing every five years, while dry chemical extinguishers are tested every twelve years on average. However, this interval is defined in accordance with NFPA 10 standards and the manufacturer specifications, which means we need to have access to the label and history of each extinguisher. If you're searching for fire extinguisher recharge near me, professional inspection and recharging help ensure your equipment is ready for use.

Fire Code Compliance

The BC Fire Code is aligned with NFPA 10, which states that fires extinguishers in commercial buildings and buildings of multiple units must be inspected and serviced regularly. Fire inspectors and insurers will want to see evidence of this.

We make sure our inspections and servicing:

  • Identify problems early so that you don't experience failed inspections
  • Keep clear service and inspection records
  • Meet insurance and compliance requirements

If your team also needs fire extinguisher recharging, we can help with that too. Exact requirements depend on your building, how you use it, and the type of extinguishers you have.

Why Choose Otis Fire Protection

We've been servicing fire protection equipment for over 12 years, with 350+ projects across the Lower Mainland. Our technicians are certified, and they do the work themselves, so you know who's at your door.

  • Certified technicians with hands-on fire protection experience
  • Written service report after every visit
  • Recharge, testing, and inspection from one team
  • Quick scheduling, with 24/7 emergency service
  • Familiar with BC Fire Code and NFPA 10 requirements

Book Your Fire Extinguisher Service

Contact Otis Fire Protection to schedule fire extinguisher inspection, servicing, recharge, or hydrostatic testing services.

Frequently Asked Questions

How often should a fire extinguisher be recharged?

Can I recharge a fire extinguisher myself?

Should I repair or replace my fire extinguisher?

How long does fire extinguisher recharge take?

Can multiple extinguishers be serviced at one location?

Do you provide fire extinguisher recharge service in the Lower Mainland?